In this article
System settings that configure the CATI Supervisor module are gathered in a single list. This is presented in tabular form on the Administration menu > System Settings tab. All Administration resources are accessible only by supervisors with Administrator rights; the Admin tab is hidden from other supervisors. The illustration below shows the System Settings list.
Figure 2 - Example of the Admin > System Settings page
All settings are grouped according to their role in the system, with the group name being shown in the Group column. You can filter the grid by the Group name to facilitate search.
The default value for each setting is shown in the Default Value column. You can change the default value to the overridden value - to do this either double-click the required setting row in the list, or select the required row and press the Change Overridden Value button on the toolbar, then select the value in an overlay dialog that appears, as shown below.
Figure 3 - The Change Overridden Value dialog
The Value field format changes depending on the selected setting - use the suggested format to provide a correct value. Click Save on completion; the overlay is closed and the new value is displayed in the Overridden Value column. The new overridden value is applied in the system.